Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Our accumulators are easily adapted to your production needs. The accumulation capacity and change over speed are adjusted to correspond to the line performance to maximize your productivity.
Our Accumulator MHE SBL 500 has a horizontal beam on which the carriage moves. A set of (moving) wheels are fixed to the carriage. The "fixed" set of wheels with a pneumatic cylinder can move about 400 mm along the beam, and work as a dancer to keep the cable tension low. The cable loops between the two sets of wheels are supported by horizontal cable supports. The machine is equipped with a Unidrive AC drive only. The whole control system is built inside the drive.
The carriage is pulled by a chain from an AC motor which is controlled by a frequency converter. Its speed is controlled by the dancer function and the cable tension is set by adjusting the cylinder air pressure. Three different operating modes can be chosen: 1. DANCER MODE 2. TORQUE MODE. The tension can be adjusted from a control panel which can be mounted freely for easy operation.
The accumulator is automated and the carriage can be jogged when threading the cable. The accumulator uses plastic wheels which allow low tension in addition to great mechanical strength.
|Cable diameter max.||20 mm|
|Pulling force in the carriage, max.||5600 N|
Exact values depend on the assembly.
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more
HVDC Optimization for NCC Read more
In any asset-intensive company, profitability is directly related to plant availability. Implement a coprehensive maintenance strategy with software from Maillefer and ADVARIS. Read more
Measure the extrusion process quality in real time. We help push the boundaries of what is possible and bring extrusion technology to new heights. Read more
Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more
We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more