Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Gel Filling System GEL 300 offers a stabile gel flow and viscosity from the start. Thanks to a special precision pump system, GEL 300 gives a stabile output also with micro tubes with a very small wall thickness.
The filling system is designed for continuous loose tube production. The system has a main container where the gel is continuously circulated under vacuum. This treatment removes all air bubbles from the gel. After the vacuum circulation the gel is fed to the line, where there is another circulation loop. Before the production starts jelly is continuously circulated from the main container to the jelly stand. This dual circulation system ensures that at the start up the air bubble free jelly has immediately a constant viscosity and pressure.
The gel filling system is filled automatically during the run. The system can be equipped with additional pumps to feed up to three lines simultaneously.
The main assembly is equipped with following units: a main storage vessel, a vacuum pump, and a circulation pump.
|Jelly viscosity at 20 °C, max.||25 000 mPas at 100 1/s|
|Output, max.||135 l/h|
|Output pressure, max.||150 bar|
Exact values depend on the assembly.
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more
HVDC Optimization for NCC Read more
In any asset-intensive company, profitability is directly related to plant availability. Implement a coprehensive maintenance strategy with software from Maillefer and ADVARIS. Read more
Measure the extrusion process quality in real time. We help push the boundaries of what is possible and bring extrusion technology to new heights. Read more
Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more
We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more