Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
Our Line Control Autocure 4.1 ensures optimum capacity and high dilectric strength with minimum production cost.
Our Line Control Autocure 4.1S (slimline) provides control of the line, monitoring of the machines, production follow-up and a user friendly operator interface. It also enables productio enhancments and ensures production reliability of the line as well as the quality of the final product.
The line control consists of a Line Control Unit (LCU) with a fail safe Siemens PLC, an industrial field bus for controlling distributed I/O and drives, a user friendly movable control panel with a Siemens touch panel. The software contains all logical sequences and calculations for performing.
The process sequence control function is an important benefit which ensures high cable quality during ramps maximizing the amount of quality cable from the start to finish of the process and reducing the need for operator supervision. To initiate a process sequence, the operator only has to click the corresponding button, the alternatives being START (slow speed), PROD (production speed), SLOW (e.g. for reel change), and END (automatic after curing and cooling).
Synchronisation of all machines
When a sequence has been selected, the control automatically synchronizes the line speed and the curing tube temperature to be suitable for that particular phase of the process. The line control also takes care of the extruder and tube heating temperature, as well as the logics and interlocking of machines, valves, pumps, and the system diagnostic of hardware modules and bus nodes.
The user friendly man-machine interface is implemented with a Siemens touch panel. The main features of the operator interface include simple process monitoring with measurements, state displays, setvalue and command handling, basic alarm handling showing active alarms with clear texts, and a basic recipe system whcih enables production parameters to be saved and recalled when required. Note: our NCC/NCS calculations can not be automatically linked to the Siemens touch panel recipe handling.
Be Our Guest at NPE — Join Us on Stand W5947 Read more
In any asset-intensive company, profitability is directly related to plant availability. Implement a coprehensive maintenance strategy with software from Maillefer and ADVARIS. Read more
Measure the extrusion process quality in real time. We help push the boundaries of what is possible and bring extrusion technology to new heights. Read more
Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more
We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more
The efficiency of an optical cable manufacturing line can be improved significantly by increasing line speed. Maillefer has taken several steps forward in bringing high speed capability to our customers, thanks to nonlinear modeling. Read more