Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
The flexible Nitrogen Circulation System NCS allows you to optimize the process for a wide range of cables. During a ramp down, the tube/cable cooling by gas is fast and well controlled, generating less stop scrap.
The various cooling circulations are a shutdown cooling loop, and short and long gas cooling loops. In addition, a pre-cooling and separator gas circulation can be added to the system.
The nitrogen circulation unit is equipped with 3 by-product traps with the timer control valve, so that by-product can be collected efficiently from the circulating gas.
The unit consists of a gas circulation blower, a heat exchanger, three by-product outlets, a ventilation blower and all necessary valves and instruments. All these components have been installed on the same frame, which forms one complete unit.
It is ready-fitted and completely tested.
|Cooling capacity||33 kW|
|Weight approx.||1700 kg|
|Dimensions L x W x H||4010 x 1200 x 2944 mm|
|Nitrogen flow capacity||300 mᶟ/h at 10 bar (q)|
Exact values depend on the assembly.
Be Our Guest at NPE — Join Us on Stand W5947 Read more
In any asset-intensive company, profitability is directly related to plant availability. Implement a coprehensive maintenance strategy with software from Maillefer and ADVARIS. Read more
Measure the extrusion process quality in real time. We help push the boundaries of what is possible and bring extrusion technology to new heights. Read more
Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more
We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more
The efficiency of an optical cable manufacturing line can be improved significantly by increasing line speed. Maillefer has taken several steps forward in bringing high speed capability to our customers, thanks to nonlinear modeling. Read more