Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive <br />
CT 06379 Pawcatuck
Tel: +1 920-215-6628
A well-controlled cooling secures that the conductor temperature at the end seal when the insulated core comes out from the pressurized curing tube is low enough and the generation of voids is prevented.
In the Open Water Cooling Circulation OWCS water is pumped from the unpressurized water tank through the heat exchanger to the end of the cooling tube. Thus the cooling operates by a counter-flow method.
In the beginning of the cooling tube, water flows back from the water trap to the unpressurized water tank through a control valve, which controls the amount of water in the water trap. This design ensures that there is always water in the touchdown area, and that the cooling section is always filled with water.
There is a water detector in the neutral tube, which prevents water from entering into the curing section by stopping the water circulation pumps and alarms the line control.
The water circulation unit includes two water circulation pumps, a heat exchanger and the necessary valves.
The piping is made of stainless steel and includes water circulation pipes, valves and flexible hoses.
The unpressurized water tank is not included in the standard delivery (optional). Maillefer will give a main dimension drawing of the tank to the customer. The tank must be equipped with a cover and a ventilation. The water space is separated with a filter mesh, into a clean and a dirty side. By-products can be easily removed from the open tank.
Water circulation unit
The water circulation unit consists of two pieces of water circulation pumps (one is spare), a plate type heat exchanger, necessary valves and instruments.
All these components have been installed on the same frame, which forms one complete unit. The water circulation unit is ready-fitted and completely tested.
Water trap for CCV line
The water trap for CCV line is equipped with a lid including a sight glass, a by-product outlet and a level sensor with a magnetic display controlling the water level height in the water trap.
|Circulation pumps||50 Hz, 30 kW (25 bar)|
|Pump output||60 Hz, 16 m3/h / H=208 m (20 bar)|
|Heat exchanger type||Plate|
|Heat transmission performance||130 kW|
|Number of plates||33 pcs|
Exact values depend on the assembly.
Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more
We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more
The efficiency of an optical cable manufacturing line can be improved significantly by increasing line speed. Maillefer has taken several steps forward in bringing high speed capability to our customers, thanks to nonlinear modeling. Read more
Do you know how to make the most out of your production? With the experience of over 4,000 line deliveries, we have now launched a full stack of expert services. Read more
Maillefer was proud to be part of wire South America 2017, an event collecting hundreds of exhibitors and thousands of visitors from around the region. The exhibition was organized in São Paulo, Brazil. Read more
Great news! We've just reduced cycle times on all recent TCA coilers. Imagine what fewer seconds per coiled pipe or tube will get you. Read more
Maillefer's Lars Fagerholm, is eager to share a few words about Davis-Standard and Maillefer becoming one organization. The transaction is now complete! Read more
Polyurethane (PUR or PU) is an extremely resistant polymer used in niche applications like compressed air tubes. Be pleasantly surprised on the variety of tubes & pipes that our PSL 032 // Extend extrusion line produces. Read more