Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
#1 Extrusion Drive
CT 06379 Pawcatuck,
Tel: +1 920-215-6628om;d.c;dar;tan;s-s;avi;w/d;cho;jza
The Splice Box SB 150 give easy and ergonomic access to prepare the crosshead and cable for production before the curing tube is pressurised. The same applies when production is stoped and the preassure needs to be released from the curing tube.
The splice box consists of a steel frame, movable and fixed tubes, a sealing tube and electrical transfer equipment. The opening and closing of the splice box is achieved by push-buttons on the N2P control box.
The basic machine consists of a frame, a movable tube, a shifter mechanism for the movable tube and heat insulation for the movable tube.
The frame of the splice box is the fixing point of the whole CCV line and must be fastened properly to the floor construction according to given forces.
The fixed tube of the splice box is equipped with a gas circulation pipe point. The size of the flange, which is connected to the CV tube, is selected according to the CV tube. The tube is insulated from the cold, in order to reduce the amount of by-product.
Base of splice box for CCV line
In a CCV line, the base of the splice box is fastened to the extruder platform and the angle of the splice box can be adjusted depending on the catenary factor of the line.
Heat insulation of splice box
The movable tube of the splice box is equipped with an internal heat insulated protection tube. The external part of the fixed tube is heat insulated as well.
N2P control box
The N2P control box is located on the frame of the slice box and includes a pressure sensor, a manometer, a 0-pressure switch and push buttons for opening/closing the splice box.
Energy supply chain for X-ray
The energy supply chain is used to protect X-ray cables and hoses while moving the telescope. The chain and the support are located beside the splice box.
|Diameter of movable tube||DN200|
|Diameter of fixed tube||DN250|
|Travel of movable tube, max.||1150 mm|
|Dimensions, L||3400 mm|
Exact values depend on the assembly.
A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more
Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more
We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more
HVDC Optimization for NCC Read more
In any asset-intensive company, profitability is directly related to plant availability. Implement a coprehensive maintenance strategy with software from Maillefer and ADVARIS. Read more
Measure the extrusion process quality in real time. We help push the boundaries of what is possible and bring extrusion technology to new heights. Read more
Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more
We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more