Nearest Maillefer contacts for USA
KN Manufacturing Solutions LLC
5464 Woodrun Ct
GA 30517 Braselton
Tel: +1 770 967 1770
Cell: +1 404 202 9655
Fax: +1 770 967 1770com;ol.;nms;n/k;ine;iem;i.n;kar
TDC (Technical Development Corporation)
Wire & Cable
11845 Vanstory Drive
NC 28078 Huntersville
Maillefer North America
Pipe & Tube
Phipps Bend Industrial Park<br />
402 Phipps Bend Road
TN 37873 Surgoinsville
Tel: +1 423 817 2440
Fax: +1 423 212 0131om;a.c;rus;efe;ill;/ma;jon
Maillefer North America
Wire & Cable
4012 Washington Drive<br />
PA 19061 Philadelphia
Tel: +1 920-215-6628
Our portal take-ups meet the demands of a heavy load carrying capacity and a broad reel range due to extending production lengths. The frame design allows reel loading from the rear or the front of the machine. Different frame lengths and the possibility to mount on rails helps in reel logistics.
The traversing Take-up TUT 10 has a hanging pintle portal design. The telescopic lifting arms are narrow, allowing good access to the reel when fastening the cable.
The take-up has two main components: the portal frame and the traversing carriage. The telescopic lifting arms are suspended from the moving carriage, which is wheel mounted on the beams. All pintle movements, up-down and in-out, are motorized.
The carriage traverses during operation to maintain a straight centerline of the cable entering the reel. The traversing pitch and turning points can be set by hanging control panel push-buttons.
The reel is dog-pin driven by a Vector controlled AC motor over a gearbox. The main motor can be run with a constant torque, or controlled by either a dancer or an accumulator. The motor has a forced ventilation and is equipped with an electromagnetic brake. The brake can function as a holding brake or an emergency stop brake. One set of pintles is included in the basic machine. The guide rollers are suspended from the portal frame. The rollers can be easily adjusted for different cable diameters.
All functions, such as reel rotation, traversing, pintle movements and auto reel handling, are activated and controlled from the hanging control panel.
The take-up beam is long enough to allow the carriage to traverse over the reel width.
Automatic positioning of the carriage from the loading position to the production position and vice versa can be activated by pressing a button. The full reel moves automatically to the reel change position. The reel is lowered and the pintles are opened. After the pintles are manually entered into the empty reel, a second button is activated, and the reel is lifted and moved sideways to the working position.
The machine is surrounded with safety fences to protect the operator and outsiders from the moving and rotating parts of the machine. The manually operated turning doors on the rear and the sliding door on the front of the machine are equipped with electromechanical locks. The main motor and the automatic functions cannot be started before all the doors are closed and locked.
The machine fulfils all EEC machine and electrical directives and is equipped with CE and EC Declaration of Conformity labels.
|Reel weight, max.||15 000 kg|
|Reel flange diameter||3600 mm|
|Reel width||2160 mm|
|Cable diameter, max.||120 mm|
|Reel rotation speed, max.||235 rpm|
|Torque, max.||11 600 Nm|
Exact values depend on the assembly.
Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more
We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more
The efficiency of an optical cable manufacturing line can be improved significantly by increasing line speed. Maillefer has taken several steps forward in bringing high speed capability to our customers, thanks to nonlinear modeling. Read more
Do you know how to make the most out of your production? With the experience of over 4,000 line deliveries, we have now launched a full stack of expert services. Read more
Maillefer was proud to be part of wire South America 2017, an event collecting hundreds of exhibitors and thousands of visitors from around the region. The exhibition was organized in São Paulo, Brazil. Read more
Great news! We've just reduced cycle times on all recent TCA coilers. Imagine what fewer seconds per coiled pipe or tube will get you. Read more
Maillefer's Lars Fagerholm, is eager to share a few words about Davis-Standard and Maillefer becoming one organization. The transaction is now complete! Read more
Polyurethane (PUR or PU) is an extremely resistant polymer used in niche applications like compressed air tubes. Be pleasantly surprised on the variety of tubes & pipes that our PSL 032 // Extend extrusion line produces. Read more