Change country to:

Search results

High Output Screw Value Package

New screw design leads to higher output for your extruder.

Are you interested in increasing your 1 kV insulation line production speeds by 20%?

You can do it by fully utilizing the potential of our extrusion technology

In a proven customer case significant line speed improvements were achieved when a standard screw was changed to our high output screw in a 120-24D extruder. A comparison was done between 120 mm2 and 240 mm2 sector shape conductors during a trial production of XLPE insulated conductor. With a standard screw the 120 mm2 conductor was produced at 170 m/min and the 240 mm2 conductor at 90 m/min. Production speeds with our High Output Screw Value Package for the same products were 200 m/min and 110 m/min. The corresponding increase was 17.6 % and 22.2 %.

What you get

Higher throughput due to the new screw design, and improved temperature control. In addition, compared to Maillefer’s previous generation extruders, you will enjoy an increase of PVC, XLPE (silane co-polymers) and PE of up to 15 – 20%.

  • Screw with high specific output

New lines compatible with High Output Screw Value Package

Meet us at wire China 2018 in on 26 - 29 September, 2018!

Wire India

Read more

Irrigation Show

Read more

K

Read more

From our blog Visit blog

Multiply the Probabilities for Success

20.6.2018

A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more

Multiply the Probabilities for Success

Oriental Seizes Special Tubing Opportunity

13.6.2018

Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more

Oriental Seizes Special Tubing Opportunity

33% Jump in Medical Tube Production

6.6.2018

We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more

33% Jump in Medical Tube Production

HVDC Optimization for NCC

18.5.2018

HVDC Optimization for NCC Read more

HVDC Optimization for NCC

Maillefer and ADVARIS introduce advanced plant maintenance

14.3.2018

In any asset-intensive company, profitability is directly related to plant availability. Implement a coprehensive maintenance strategy with software from Maillefer and ADVARIS. Read more

Maillefer and ADVARIS introduce advanced plant maintenance

Topography Scanner – Art and science around digital quality measurement

13.3.2018

Measure the extrusion process quality in real time. We help push the boundaries of what is possible and bring extrusion technology to new heights. Read more

Topography Scanner – Art and science around digital quality measurement

Get More from MiniFlat Drippers

12.12.2017

Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more

Get More from MiniFlat Drippers

Visit Us at Wire & Cable Arabia 2017

7.12.2017

We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more

Share by email