Change country to:

Search results

High Output Value Package for HV/EHV CCV Lines

High and extra high voltage cables have important insulation thicknesses, and considerable insulation weight is supported by a small conductor. If the viscosity of the material close to the conductor decreases, as is the case when the temperature increases rapidly, significant drooping occurs and the insulation will be off-centered. In addition to eliminating the drooping effect, our patented method increases heating and cross-linking capacity, and thus line speeds, in catenary continuous vulcanizing lines for medium, high and extra high voltage cable production.

Would you like to remarkably increase your production line capacity?

The line speed increases over 25%

Even with 25% greater line speeds you will have better cable quality and roundness. The reduced heating length enables lower extruder platform heights and lower cable manufacturing costs. Based on your current manufacturing data, we can calculate the added value you will receive through implementation of our high output concept for CCV lines.

What you get

25% faster line speeds with postheating in neutral zone. Also, the reduced heating length enables lower extruder platform heights and lower manufacturing costs.

  • Accelerate completion of the cross-linking without drooping effects

New lines compatible with High Output Value Package for HV/EHV CCV Lines

Meet us at wire China 2018 in on 26 - 29 September, 2018!

Wire India

Read more

Irrigation Show

Read more

K

Read more

From our blog Visit blog

Multiply the Probabilities for Success

20.6.2018

A measure of how successful a system operates is to consider the probability of how well each part will run. Seek out a high measure of it when making your future equipment purchases. Read more

Multiply the Probabilities for Success

Oriental Seizes Special Tubing Opportunity

13.6.2018

Oriental had a demand to produce nylon reinforced tubing for vehicle air brakes. Seizing the opportunity, they acquired a dual layer tandem extrusion line. Shortly after production began, a new demand arrived that only needed some additional head tooling to satisfy. Read more

Oriental Seizes Special Tubing Opportunity

33% Jump in Medical Tube Production

6.6.2018

We wanted more performance from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable, thanks to more cooling, more melt and more speed. Read more

33% Jump in Medical Tube Production

HVDC Optimization for NCC

18.5.2018

HVDC Optimization for NCC Read more

HVDC Optimization for NCC

Maillefer and ADVARIS introduce advanced plant maintenance

14.3.2018

In any asset-intensive company, profitability is directly related to plant availability. Implement a coprehensive maintenance strategy with software from Maillefer and ADVARIS. Read more

Maillefer and ADVARIS introduce advanced plant maintenance

Topography Scanner – Art and science around digital quality measurement

13.3.2018

Measure the extrusion process quality in real time. We help push the boundaries of what is possible and bring extrusion technology to new heights. Read more

Topography Scanner – Art and science around digital quality measurement

Get More from MiniFlat Drippers

12.12.2017

Users of micro-drip irrigation for seasonal crops look towards the most economical thin wall laterals available. Two types fall into this category – continuous tape and miniFlat drippers. With the latest innovations on our PIL 032-miniFT//Explore extrusion lines, miniFlat is competitive with dripper spacing of 10 cm and above. Read more

Get More from MiniFlat Drippers

Visit Us at Wire & Cable Arabia 2017

7.12.2017

We welcome you to our co-exhibitor Scarab of Egypt’s booth 3B120 at Wire & Cable Arabia 2017 in Dubai, where we will be pleased to tell you more about our solutions, products and services. Read more

Share by email