Maximize Your Production Lengths

SM7S_new_mixer_stagnation_areas

The novel insulation screw SM7 is designed to reduce scorch risk by minimizing stagnation points. It is an evolution of the well proven SM5 design of which we have delivered into more than 200 insulation extruders globally.

Good subsea cables are all about a minimum number of joints and easy underwater installation. Subsea cable production is an excellent example where long production lengths are vital to minimize the number of cable joints. With our Long Run Value Package you can increase continuous production lengths up to 80% without stopping the line. All this has a direct impact on your productivity. The value package consists of our novel SM7 insulation screw and THX 70/150 LR triple crosshead.

50 - 80% increase in insulation lengths

The novel insulation screw SM7 is designed to reduce scorch risk by minimizing stagnation points. It has a much higher specific output than our earlier screws and thereby a lower melt temperature. The new SM7 screw results in a 50-80% increase in insulation lengths (measured in tons).

Better material flow and temperature control with a new crosshead

The triple crosshead THX 70/150 LR has been developed to enable longer production runs by improved material flow and temperature control. The key improvements compared to our standard triple crosshead are shorter material residence time, minimized stagnation risks, increased water tempered area, and improved distribution.

 

Jorma Leppänen
Product Manager, MV/HV/EHV Cable Solutions
jorma.leppanen@maillefer.net

Topics: Wire & cable manufacturing, Production Capacity, Performance solutions, Product quality

New Three-layer Crosshead

Tags: Wire & cable manufacturing, Novelties & Launches, Innovation

Our new three-layer crosshead THX 100/180 LR is now available for high and extra high voltage cable insulations. Optimized bi-flow distributors ...

Read more

New High Voltage Catenary Continuous Vulcanizing ...

Tags: Wire & cable manufacturing, Novelties & Launches, Product quality

Our new High Voltage Catenary Continuous Vulcanizing Line EPL 50/Enter is a versatile and economical high voltage CCV line for XLPE insulation and ...

Read more

Topography Scanner Dazzles NKT

Tags: Wire & cable manufacturing, Innovation

The topography is a novel solution for cable quality control during production. The original idea to develop such a device was sparked many years ago ...

Read more