Blog - Maillefer

State-of-the-Art Puller / Cutter for Medical Tube

March 24, 2021

The MPC 14 combines both the pulling and cutting operations into one component. It reveals itself to be a true multi-tool for the conditioning of extruded tubes.

Read more

State-of-the-Art Taping Technology

March 17, 2021

The new longitudinal taping technology for aluminum, polyester, woven, non woven and water-swellable tapes is a smart way to excel in cable quality and to boost sheathing productivity.

Read more

State-of-the-Art Multi-Layer Extrusion Head

January 20, 2021

The ECH 5/50 ML is a versatile multi-layer head for the production of automobile fuel, vapor return, battery cooling tubes, and more. Available for up to six layers, for both smooth or corrugated tubes.

Read more

Multi-Layer Extrusion Head for Corrugated Pipe

January 6, 2021

Maillefer’s multi-layer co-extrusion cell provides the maximum flexibility needed to produce the automotive or technical tubes in demand today, as well as for tomorrow. The key lies at the heart of our five or six single-screw extruder array. 

Read more

Think SMART - Act SMART!

June 24, 2020

Step changers are a real challenge. They take time to happen. But when they do, you can achieve the unimaginable. Smart Manufacturing is here.

Read more

Increase Engineering Support for Your Future Plant Project

March 19, 2020

Construction of new facilities or important expansions of existing ones all begin with a promising idea. Are you ready to face the project challenges and the unexpected? Our Factory System solution provides the answers for giving you peace of mind.
Read more

Run Times Reach New Heights

February 26, 2020

Run Times Reach New Heights

The performance of extruded high voltage XLPE insulated cables is improvable by reducing the degassing burden and realizing longer extrusion run times. Development towards those goals was rendered possible after years of close technical collaboration with material suppliers and cable manufacturers.

Read more

Maillefer Novelties @ Wire China 2018

September 14, 2018

Maillefer continues to take steps in the digitalization of manufacturing and introduces the Smart Factory and virtual reality experience for realtime optimization of production. 

Read more

33% Jump in Medical Tube Production

June 6, 2018

We wanted more speed from our extrusion lines for soft PVC intravenous (IV) tube and we got it. The jump is considerable. It increases production capacity by more than a third, thanks to improvements on the cooling section. But that is not all. The added performance called for more melt flow, which was found by upping the extruder size. Overall, our PML 032//Explore line now gives you more performance while keeping within a compact layout.

Read more

HVDC Optimization for NCC

May 18, 2018

We are continuously working together also with material suppliers to improve our products and NCC curing calculation software is not an exception. The latest update in NCC adds functionality to support material specific curing profile optimization. Now we can create constraints or optimization window for parameters that are not typically used for curing profile calculation.

Read more